Plastic Layflat Tubing

Minimum order quantity 100 kg.

Plastic Layflat Tubing (Plastic Sleeve) is used for production and packaging of various products through semi-automatic and automatic machines.
The lay-flat tubing can have high quality printing on one or both external sides and are wound on a paper spool with an inner diameter of 76 mm.

The tubular film can have gussets or can be split on one side or both sides and can be manufactured in the following ways:

Basic Layflat Tubing
Split on One Side (Centre Fold Sheet)
Split on Both Sides (Double Wound Sheeting)
Gusseted Layflat Tubing

Materials used for manufacturing:
LDPE with thickness 18-180 μm, width 20-130 cm
Degralen-L with thickness 18-180 μm, width 20-130 cm
Re-LDPE with thickness 40-180 μm, width 20-130 cm
HDPE with thickness 8-120 μm, width 30-110 cm
Degralen-H with thickness 8-120 μm, width 30-110 cm
Re-HDPE with thickness 15-120 μm, width 30-110 cm
Flexoseal with thickness 35-80 μm, width 60-120 cm
Triolen with thickness 40-100 μm, width 80-140 cm
Bi-Color with thickness 20-80 μm, a width of 58-138 cm
Ecomater with thickness 20-100 μm, width 60-130 cm

On both outer surfaces flexo-printing is possible.

Possible extras:
Sealing at low temperature
Corona treatment for printing
Needle Punch
Two side gusseting
Increased or decreased surface friction
Reduced static electricity